Correct Use - Miele PW 5064 Operating And Installation Instructions

Warning and Safety instructions
~
If this machine is being used in a
commercial environment please ensure
that all relevant health and safety
regulations are obeyed.
~
This machine may only be used in
mobile installations such as ships if a
risk assessment of the installation has
been carried out by a suitably qualified
engineer.

Correct use

~
Do not install your machine in rooms
where temperatures below freezing
may occur. Frozen hoses may burst or
split. The reliability of the electronic
control unit may be impaired at
temperatures below freezing point.
~
Before using the machine for the
first time, check that the transit bars at
the rear of the machine have been
removed (see section on "Installation").
During spinning, a transit bar which is
still in place may result in damage to
both the machine and adjacent
furniture or appliances.
8
~
Turn off the stopcock if the machine
is to be left for any length of time (e.g.
holiday), especially if there is no floor
drain (gully) in the immediate vicinity.
~
Take care to ensure that foreign
objects (e.g. nails, pins, coins, paper
clips) do not find their way into the
machine with the laundry. Soiling such
as metal shavings etc. on cloths must
be shaken out before washing.
These may damage components of the
machine (e.g. suds container, drum),
which in turn can result in damage to
the laundry.
~
If the correct amount of detergent is
dispensed, the machine should not
need to be descaled. If, however, you
do wish to descale the machine only
use proprietary non-corrosive descaling
agents and strictly observe the
instructions on the packaging. A
special descaling agent is available to
order from the Miele Spare Parts
Department or your Miele dealer.