Miele PW 5064 Operating And Installation Instructions page 59

Hygiene disinfection
The pre-set disinfection process can
be altered in the Cleaning cloths
hygiene dis. programme. There is a
choice of 4 temperatures with
corresponding holding times.
40°C / 20 min
60°C / 20 min
70°C / 10 min (factory default setting)
85°C / 15 min
Microfibre mops
When processing microfibre mops in
the Standard, Standard plus and
Chem. therm. disinfection
programmes, the suds can be cooled
down after the main wash to 45°C by
adding cold water (Cool Down).
The machine is delivered with the No
option activated (no Cool Down).
Finish Standard
In the Standard and Standard plus
programmes, the chemical finishing
process can be activated to take
place after the wash cycles (option
only available with an external
dispensing system).
The machine is delivered with the No
option activated (no chemical finish).
Settings/Supervisor level menu
Finish Disinfection
In the Thermal disinfection and
Chem. therm. Disinfection
programmes, the chemical finishing
process can be activated to take
place after the wash cycles (option
only available with an external
dispensing system).
The machine is delivered with the No
option activated (no chemical finish).
Finish Cleaning cloths
In the Cleaning cloths hygiene dis.,
Cleaning cloths 60°C and Cleaning
cloths 40°C programmes, the
chemical finishing process can be
activated to take place after the wash
cycles (option only available with an
external dispensing system).
The machine is delivered with the No
(no chemical finish) option activated.
Empty sensor
You can activate the Empty sensor
option for the external liquid
detergent containers so that a
message appears in the display
when a container is empty.
The factory default setting is No (no
empty sensor).
59