Before Using For The First Time - Miele PW 5064 Operating And Installation Instructions

Before using for the first time

Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
For safety reasons, spinning is not
possible until the machine has been
prepared for using for the first time. To
activate the spinning function you must
run a wash programme without laundry
and without detergent.
When the machine is switched on for
the first time, the welcome screen will
appear.
Miele Professional Willkommen
The welcome screen will not appear
again after the first programme has
been completed.
The display for setting the language will
then appear.
^ Use the - and + buttons to select the
language you want, and confirm your
choice by pressing the OK button.
Reminder to remove transport struts
To avoid the risk of damage, the
transport struts must be removed
before the machine is used for the
first time. See "Installation and
connection" for instructions on how
to do this.
^ After removing the transport struts (if
this has not already been done by
your fitter) press the OK button.
12
The display for setting the time will then
appear.
Setting the time of day
12:00
Set the time of day
^ Set the hour with the - and + buttons,
and confirm your setting by pressing
the OK button. Then do the same to
set the minutes. After you have
confirmed the minute setting, the
main menu will appear in the display.
Running your first programme
Your machine is now ready for the first
programme to be run.
^ Turn the programme selector to the
Cleaning cloths 40°C position.
^ Open the stopcock.
^ Press the Start button.
When the programme has finished,
your machine is ready to use for the
first time.