Settings/Supervisor Level Menu; Enter Code; Change Code - Miele PW 5064 Operating And Installation Instructions

The Settings menu (except for Suds
cooling, Display contrast and Display
brightness) are locked by a code to
prevent them being accessed by
unauthorised personnel.
Display contrast
C
Display brightness
Supervisor level
^ Select Supervisor level and confirm
your selection.
Back A
C
Access via code...

Change code...

^ Select Access via code and confirm
your selection.

Enter code

You will now be asked to enter a
3-figure code. The code is set at 000 at
the factory.
0 _ _
Enter code
^ Use the + button to enter the first
number. Confirm your selection of
this number by pressing the OK
button. Now enter the second
number.
^ Repeat the process until all three
numbers have been entered.
^ After entering the code, press OK,
and confirm by pressing OK again.

Settings/Supervisor level menu

You are now in Supervisor level.
You can alter all the settings described
previously as well as the settings on the
following pages.
Change code
You can alter the code if you want to
prevent it being accessed by
unauthorised personnel.
Display contrast
C
Display brightness
Supervisor level
^ Select Supervisor level and confirm
your selection.
Back A
C
Access via code...
Change code...
^ Select Change code and confirm
your selection. Follow the instructions
in the display.
55