Pre-Spin; Pre-Wash/Pre-Rinse; Anti-Crease - Miele PW 5064 Operating And Installation Instructions

This machine has fully electronic
controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
The programme sequences outlined in
the chart are based on the basic
default programme with a full load.
Additional options which can be
selected have not been taken into
account.
The display shows the stage the
programme has reached.
Programme sequence

Pre-spin

In the Standard, Standard plus,
Thermal disinfection and Chem. therm.
disinfection programmes, mops are
spun briefly after the Programme start.

Pre-wash/Pre-rinse

Some programmes include a Pre-rinse
cycle to remove coarse soiling and
detergent residues. In cases of very
heavy soiling, an additional Pre-rinse or
Pre-wash cycle can be selected
depending on the programme.

Anti-crease

At the end of the programme, the drum
continues to turn at intervals for up to
30 minutes to maintain uniform residual
moisture throughout the load and to
help prevent creasing (excluding the
Pads and New mops programmes).
The door can be opened and items
removed at any time during the
anti-crease phase.
25