Table of Contents
Advertisement
Supervisor level
Service interval
Service information can appear in the
display. You can configure whether a
date or the number of operating hours
is displayed.
You can select up to 3 messages with
their own text.
Your message is displayed at the end of
the program and can be acknowledged
with OK. The same message appears at
the end of the next program.
Settings
This setting allows you to determine the
interval (by hours or date) at which the
message appears.
- Factory default: Off
- By time
You can then select a time interval
from 1–9999 hours.
- By date
You can then enter a date.
Message text
Enter your message for your planned
maintenance work.
Resetting the display
The message appears until the display
is permanently reset. The message then
appears again once the next interval is
reached.
94
External applications
Empty sensor
External hardware is connected via the
Miele XCI Box.
A siphon contact can be used to de-
tect whether external detergent con-
tainers are empty. A message appears
if a container is empty.
- Off (factory default)
- Normally open contact
The siphons are equipped with a nor-
mally open contact.
- Normally closed contact
The siphons are equipped with a nor-
mally closed contact.
Early warning counter
External hardware is connected via the
Miele XCI Box.
An internal counter reports when an
external dispenser container is almost
empty. The counter in question then
has to be reset.
Advertisement
Table of Contents
