Standard Finish (Only With Av Version); Disinfection Finish (Only With Av Version); Empty Sensor; Water Level Cottons - Miele PW 5105 Vario Commissioning Manual

Settings/Supervisor level menu
Standard finish
(only with AV version)
Mops can undergo a chemical
finishing process in the Mops
program (option only available with
an external dispensing system).
The machine is delivered with the No
option activated (no chemical finish).
The setting Standard finish is visible
in the LP version, but has no function.
Disinfection finish
(only with AV version)
In the Mops Th and Mops Ch.Th
programs, the chemical finishing
process can be activated to take
place after the wash cycle. (The
agent is dispensed via the fabric
conditioner compartment or via an
external dispensing system).
The machine is delivered with the No
option activated (no chemical finish).
The setting Disinfection finish is
visible in the LP version, but has no
function.

Empty sensor

You can activate the Empty sensor
option for the external liquid
detergent containers so that a
message appears in the display
when a container is empty.
The factory default setting is No (no
empty sensor).
48

Water level Cottons

You can increase the water level for
the main wash in the Cottons hygiene
and Cottons universal programs.
The machine is delivered with the Block
parameters option selected (the water
level will be controlled according to the
data programmed on-site).

Water level Min. iron

You can increase the water level for
the main wash in the Minimum iron
program.
The machine is delivered with the Block
parameters option selected (the water
level will be controlled according to the
data programmed on-site).

Pre-wash temp. Cottons

You can select the temperature you
want the pre-wash to be carried out
at in the Cottons hygiene and Cottons
universal programs.
The machine is delivered with the Block
parameters option selected (the
temperature will be controlled
according to the data programmed
on-site).