Program 300 - Plu Descriptor Programming - Sam4s ER-5115II Operator's And Programming Manual

Program 300 - PLU Descriptor Programming

1. Turn the control lock to the P position.
2. To begin the program, enter 3 0 0, press the SBTL key.
3. Select the PLU you wish to program in one of the following ways:
4. Refer to the "Descriptor Code Chart" on page 107 and determine the codes for the
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
106  Programming
3 0 0 SBTL

Press a PLU key on the keyboard, or
PLU

Press a level key, then an PLU key, or
LEVEL
PLU
1/2/3

Enter the number of the PLU (1-1000) and press the PLU key, or
descriptor you wish to program. Enter up to 12 three-character codes; press the
X/TIME key.
Enter up to 12
three character
VALID
codes
program.
CASH
PLU
X/TIME
SAM4s ER-5115II Electronic Cash Register v1.6