Sam4s ER-5115II Operator's And Programming Manual page 159

Programming Group Descriptors
1. Turn the control lock to the P position.
2. To begin the program, enter 9 1 0 , press the SBTL key.
3. Enter the number ( 1 - 20 ) of the group you wish to program; press the X/TIME key.
4. Refer to the "Descriptor Code Chart " on page 153 on and determine the codes for the
5. To program additional groups, repeat from step 3, or press the CASH key to finalize
SAM4s ER-5115II Electronic Cash Register v1.6
9 1 0 SBTL
X/TIME
descriptor you wish to program. Enter up to 12 three-character codes; then press the
SBTL key. Repeat from step 3 to program additional group descriptors.
Enter up to 12
three character
codes
the program.
CASH
SBTL
Programming  155