Advertisement
Fuselage Assembly
5. Let's mount the landing gear first. Locate the carbon fiber landing gear, (4) 3mm
machine
screws, (2) park flyer axles, (2) nylon insert lock nuts, (2) wheel collars, (2) wheel pants, (2)
wheels
6. Place the wheel on the axle followed by the wheel collar. Slide the wheel pant over the axle
with the retention ring inside the wheel pant. This ring will keep the wheel pant in place with
friction. Insert the threaded portion of the axle into the hole in the end of the landing gear leg
and secure with the nylon insert locknut. A dab of silicon glue between the pant and gear leg
will keep the pants secure but allow them to move in the event of a rough landing or crash,
minimizing damage.
7. Insert the gear legs through the slots and retain with the (4) 3mm bolts and washers. Make
sure to put a drop of blue Loctite on the bolt threads. The gear legs should sweep toward the rear
of the plane.
Advertisement
