Table of Contents
Advertisement
Contents
General View of the Equipment . . . . . . 2
Intended Use . . . . . . . . . . . . . . . . . . . 3
Warnings and Safety Precautions . . . . 3
Getting Started . . . . . . . . . . . . . . . . . . 6
Operation . . . . . . . . . . . . . . . . . . . . . . 8
Applications . . . . . . . . . . . . . . . . . . . . 10
Calibration/Adjustment . . . . . . . . . . . . 13
Menu Settings . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . 19
Care and Maintenance . . . . . . . . . . . . 20
Recycling . . . . . . . . . . . . . . . . . . . . . . 21
Interface Description . . . . . . . . . . . . . . 22
Specifications . . . . . . . . . . . . . . . . . . . 22
Accessories . . . . . . . . . . . . . . . . . . . . . 23
Documents . . . . . . . . . . . . . . . . . . . . . 24
Declaration of Conformity . . . . . . . . . . 24
Intended Use
The PMA7501-Y00G | -Y00GL (Series:
PMA.World | PMA.Net) scales feature a
graphic display and have been specially
designed for use in paint-mixing appli-
cations. The PMA.Net is equipped with
an Ethernet interface and can either be
directly connected to the network inter-
face of a PC, or via a 10BaseT/100BaseTX
LAN.
This scale can be operated either using
the keypad on the display and control
unit (in "stand alone" mode) or using the
application software (e.g., paint manu-
facturers' paint-mixing applications)
installed on your PC. Communication is
carried out via the data interface.
If required, Sartorius can supply you with
DOS- or WINDOWS®-based device drivers
to generate application programs.
Note:
Read the installation and operating
instructions carefully before connecting
the PMA7501-Y... and putting it into
operation.
Warnings and Safety
Precautions
Note:
Improper use or handling can result in
property damage and/or personal injury.
Only qualified personnel may install and
operate the equipment. When operating
the equipment in a potentially explosive
atmosphere (Zone 2), make sure you
observe the warnings and safety informa-
tion in their entirety during installation
and operation, as well as while perform-
ing maintenance and repair work on
the equipment (e.g.: EN60079-14). The
standards, regulations, occupational safe-
ty requirements and environmental pro-
tection laws valid in your country must
be observed. It is important that all per-
sonnel using the equipment understand
this warning and safety information, and
have access to the relevant documents
at all times. Furthermore, the warning
and safety information supplied with any
electrical equipment connected, such as
peripheral devices, must be observed as
well. The warnings and safety precau-
tions may have to be supplemented by
the equipment operator. All operating
personnel must be informed of any addi-
tions to these instructions. Make sure the
equipment is accessible at all times.
General Provisions for Installing the
PMA7501-Y00G | -Y00GL
The PMA7501-Y00G | -Y00GL mod-
els meet the requirements defined in
EC Directive 94/9/EC for Class II, Cat-
egory 3D equipment and are suitable for
operation in potentially explosive atmos-
pheres (Zone 2) in accordance with the
KEMA05ATEX1248X EC type-examination
certificate. Strictly observe the Safety Pre-
cautions in accordance with the diagram
36457.741.20-A4 (refer to "Documents")!
Furthermore, PMA7501-Y00G | -Y00GL
models meet the EC Directives for elec-
tromagnetic compatibility and electrical
safety (refer to the chapter on C Marking).
3
Hide quick links:
Advertisement
Table of Contents
