Sartorius PMA7501-Y00G Installation Instructions Manual page 12

Example (cumulative):
1.
Place an empty paint can
on the weighing pan (11).
+ 118.0 g
4.
Press the key [MEM] (9).
L
STO 01
7.
Pour in the third component.
+ 203.0 g
Opps!
You poured in too much!
The correct weight for the
formula is 200.0 g.
10.
Press the key [MEM]
L
(9). COR 01
13.
Press the key [MEM] (9)
L
COR 02
16.
Press the key [MEM].
L
The scale will automatically
return to the formulation
program "C" disappears.
+ 200.0 g.
12
2.
Press the key (5)
U
0.0 g
5.
Pour in the second
component.
+ 110.0 g
8.
Press the key (4) to start
y
the recalculation mode.
A "C" = correct flashes on
the display=
Correct will flash on the
display.
11.
1. Add the first component.
"C1" is displayed. –1.7 g
14.
Add the second compo-
nent. "C2" is displayed.
–2.0 g
17.
To check the total weight,
press the c key (8) [REC]
"C" = Correction factor, in
this example 1.03.
(Total formulation weight +
correction factor)
3.
Pour in the first component.
+ 50.0 g
6.
Press the key [MEM] (9).
L
STO 02
9.
Press the key (4) several
y
times to correct the value to:
+ 200.0 g
12.
Pour in paint until 0.0 g
is displayed.
0.0 g
15.
Pour in paint until the
value 0.0 g is obtained.
0.0 g
18.
Add the fourth component
+1000.0 g
We have come to the end
of our example.