L2Tp - D-Link DIR-809 User Manual

Section 3 - Configuration
Choose L2TP (Point-to-Point-Tunneling Protocol ) if your ISP uses a L2TP connection. Your ISP will provide you with a username
and password.
My Internet Select L2TP (Username/Password) from the drop-down menu.
Connection:
Address Here the user can specify whether this Internet connection requires the
Mode: use of a dynamic or static IP address. L2TP usually requires a
dynamic IP configuration.
L2TP IP Enter the L2TP IP address used here. This
Address: option is only available if Static IP is selected.

L2TP

Enter the L2TP subnet mask used here.
Subnet
Mask:
L2TP Enter the L2TP gateway IP address used here.
Gateway IP
Address:
Primary Enter the primary DNS IP address used here.
DNS
Address:
MAC The default MAC address is set to the WAN's physical interface MAC ad-
Address: dress on the broadband router. It is not recommended that you change
the default MAC address unless required by your ISP.
You can use the Copy Your PC's MAC Address button to copy the MAC
address of the Ethernet card installed by your ISP and replace the WAN
MAC address with the MAC address of the router. It is not recommended
that you change the default MAC address unless required by your ISP.
D-Link DIR-809 User Manual
L2TP
24