Wi-Fi Protected Setup Wizard - D-Link DIR-809 User Manual

Section 3 - Configuration
Wireless Settings: Wi-Fi Protected Setup Wizard
If your Wireless Clients support the WPS connection method, this Wi-Fi Protected Setup Wizard can be used to initiate a wireless connection be-
tween this device and Wireless clients with a simple click of the WPS button. The Wi-Fi Protected Setup Wizard is specially designed to assist basic
network users with a simple, step-by-step set of instructions to connect wireless clients to this router using the WPS method.
To initiate the Wi-Fi Protected Setup Wizard click on the Add Wireless Device with WPS button.
Step 1: In this step the user have two options to choose from. You can choose Auto if the
wireless client supports WPS, or Manual if the wireless client does not support WPS.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made and
return to the main wireless page.
Step 2: After selecting Auto, the following page will appear. There are two ways to add
a wireless device, that supports WPS. Firstly, there is the Personal Identification Number
(PIN) method. Using this method will prompt the user to enter a PIN code. This PIN code
should be identical on the wireless client. Secondly, there is the Push Button Configura-
tion (PBC) method. Using this method will allow the wireless client to connect to this
device by similarly pressing the PBC button on it.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made and
return to the main wireless page.
D-Link DIR-809 User Manual

Wi-Fi Protected Setup Wizard

55