Pptp - D-Link DIR-809 User Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
My Internet Select PPTP (Username/Password) from the drop-down menu.
Connection:
Address Select Dynamic (most common) or Static. Select Static if your ISP as-
Mode: signed you the IP address, subnet mask, gateway, and DNS server ad-
dresses.
PPTP IP Enter the IP address (Static PPTP only).
Address:
PPTP Subnet Enter the primary and secondary DNS server addresses (Static PPTP only).
Mask:

PPTP

Enter the gateway IP address provided by your ISP (Static only).
Gateway IP
Address:
Primary DNS The DNS server information will be supplied by your ISP (Internet Service
Server: Provider.)
MAC The default MAC address is set to the WAN's physical interface MAC ad-
Address: dress on the broadband router. It is not recommended that you change
the default MAC address unless required by your ISP.
You can use the Copy Your PC's MAC Address button to copy the MAC
address of the Ethernet card installed by your ISP and replace the WAN
MAC address with the MAC address of the router. It is not recommended
that you change the default MAC address unless required by your ISP.
PPTP Server Enter the server IP address provided by your ISP (optional).
IP Address:
D-Link DIR-809 User Manual
PPTP
22