Port Forwarding - D-Link DIR-809 User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Name:
Enter a name for the rule or select an application from the drop-down menu.
Select an application and click << to populate the fields.
IP Address: Enter the IP address of the computer on your local network that you want
to allow the incoming service to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer will be listed in the
"Computer Name" drop-down menu. Select your computer and click <<.
TCP/UDP: Enter the TCP and/or UDP port or ports that you want to open. You can enter
a single port or a range of ports. Separate ports with a common.
Example: 24,1009,3000-4000
D-Link DIR-809 User Manual

Port Forwarding

43