Wireless Router Mode; 2.4G Wireless Network Settings - D-Link DIR-809 User Manual

Section 3 - Configuration
Enable Select or deslect this checkbox in order to enable or disable the 2.4 GHz
Wireless
wireless radio.
Wireless The Service Set Identifier (SSID) is the name of your wireless network. Cre-
Network
ate a name using up to 32 characters. The SSID is case-sensitive. Enable
Name: Auto Channel
Enable Auto The auto channel selection setting can be selected to allow this device to
Channel
choose the channel with the least amount of interference.
Scan:
Wireless
By default the channel is set to 1. The Channel can be changed to fit the
Channel: channel setting for an existing wireless network or to customize the wire-
less network. If you enable Auto Channel Selection, this option will be
greyed out.
Transmission Select the transmit rate. It is strongly suggested to select Best (Automatic)
Rate: for best performance.
WMM WMM is QoS for your wireless network. This will improve the quality of
video and voice applications for your wireless clients.
Enable
The Hidden Wireless option allows you to hide your wireless network.
Hidden When this option is set to Visible, your wireless network name is broad-
Wireless casted to anyone within the range of your signal. If you are not using en-
cryption then they could connect to your network. When Invisible mode
is enabled, you must enter the Wireless Network Name (SSID) on the client
manually to connect to the network.
D-Link DIR-809 User Manual

Wireless Router Mode

2.4G Wireless Network Settings

29