L2Tp - D-Link DIR-878 User Manual

Ac1900 high power wi-fi gigabit router
Hide thumbs Also See for DIR-878:
Table of Contents

Advertisement

Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP can provide you with a username
and password.
L2TP Server IP
Enter the L2TP Server IP Address provided by your ISP.
Address:
Username:
Enter the Username provided by your ISP.
Password:
Enter the Password provided by your ISP.
Reconnect Mode:
Select either Always on, On demand, or Manual.
Maximum Idle
Enter a maximum idle time during which the Internet connection
Time:
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Address Mode:
Select Static IP if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP.
L2TP IP Address:
Enter the L2TP IP Address provided by your ISP (for Static IP only).
L2TP Subnet
Enter the L2TP Subnet Mask provided by your ISP (for Static IP
Mask:
only).
Enter the L2TP Gateway IP Address provided by your ISP (for
L2TP Gateway IP
Address:
Static IP only).
Primary DNS
Enter the Primary DNS Server IP address assigned by your ISP.
Server:
Enter the Secondary DNS Server IP address assigned by your ISP.
Secondary DNS
Server:
D-Link DIR-878 User Manual

L2TP

31

Advertisement

Table of Contents
loading

Table of Contents