Static (Assigned By Isp) - D-Link DIR-809 User Manual

Section 3 - Configuration
My Internet Connection is: Static IP
Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP
address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields
must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address
if it is not in this format.
My Internet Select Static IP to manually enter the IP settings supplied by your ISP.
Connnection
IP Address: Enter the Static IP address provided by the ISP here.
Subnet Mask: Enter the Subnet Mask provided by the ISP here.
Default Enter the Gateway IP address provided by the ISP here.
Gateway:
MAC Address: The default MAC Address is set to the Internet port's physical interface MAC
address on the Broadband Router. It is not recommended that you change
the default MAC address unless required by your ISP. You can use the Copy
Your PC's MAC Address button to replace the Internet port's MAC address
with the MAC address of your Ethernet card.
Primary Enter the Primary DNS IP address used here.
DNS Address:
Secondary
Enter the Secondary DNS IP address used here. This field is normally op-
DNS Address: tional. Only one DNS address is required for a functional Internet connec-
tion, but using a second DNS address provides more stability.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal
performance with your specific ISP. 1500 is the default MTU.
D-Link DIR-809 User Manual

Static (assigned by ISP)

19