Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Configure
Select Turn MAC Filtering Off, Allow MAC addresses listed below, or Deny
MAC
MAC addresses listed below from the drop-down menu.
Filtering:
MAC
Enter the MAC address you would like to filter.
Address:
To find the MAC address on a computer, please refer to the Networking Basics
section in this manual.
DHCP Client:
Select a DHCP client from the drop-down menu and click << to copy that
MAC Address.
D-Link DIR-809 User Manual
MAC Filter
45