Advanced; Virtual Server - D-Link DIR-809 User Manual

Section 3 - Configuration
This will allow you to open a single port. If you would like to open a range of
ports, refer to the next page.
Name:
Enter a name for the rule or select an application from the drop-down menu.
Select an application and click << to populate the fields.
IP Address: Enter the IP address of the computer on your local network that you want
to allow the incoming service to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer will be listed in the
"Computer Name" drop-down menu. Select your computer and click <<.
Private Port/ Enter the port that you want to open next to Private Port and Public Port.
Public Port: The private and public ports are usually the same. The public port is the port
seen from the Internet side, and the private port is the port being used by
the application on the computer within your local network.
Protocol Select TCP, UDP, or Any from the drop-down menu.
Type:
D-Link DIR-809 User Manual

Advanced

Virtual Server

42