L2Tp - D-Link DWR-922 User Manual

Section 4 - Configuration
Address Mode: Choose Static IP only if your ISP assigns you an IP address.
Otherwise, please choose Dynamic IP.
L2TP IP Address: Enter the information provided by your ISP (Only applicable for
Static IP L2TP).
L2TP Subnet Enter the information provided by your ISP (Only applicable for
Mask: Static IP L2TP).
L2TP Gateway IP Enter the information provided by your ISP (Only applicable for
Address: Static IP L2TP).
L2TP Server IP IP address of L2TP server.
Address:
Username: User/account name that your ISP provides to you for L2TP dial-up.
Password: Password that your ISP provides to you for L2TP dial-up.
Verify Password: Re-type your password in this field.
Choose Always-on when you want to establish L2TP connection
Reconnect
all the time. If you choose Connect-on-demand the device will
Mode:
establish L2TP connection when local users want to use Internet,
and disconnect if no traffic after time period of Maximum Idle
Time.
Maximum Idle The time of no activity to disconnect your L2TP session. Set it to 0
or choose Always-on to disable this feature.
Time:
D-Link DWR-922 User Manual

L2TP

15