License Plate Lamp - Jeep 2016 Cherokee Owner's Manual

Hide thumbs Also See for 2016 Cherokee:

Table of Contents

724 MAINTAINING YOUR VEHICLE

4. Using a fiber stick or flat blade screw driver, open the

trim panel exposing the back of the liftgate lamp.

5. Disconnect the electrical connector.

6. Twist the socket counterclockwise and remove from

7. Pull the bulb to remove it from the socket.

8. Replace the bulb, reinstall the socket.

9. Connect the electrical connector.

10. Reinstall the trim panel and the lower trim.

11. Close the liftgate.

License Plate Lamp

1. Using a small screwdriver, press inward the locking

tab on the side of the lamp assembly and pull down on

the lamp assembly for removal.

2. Pull bulb from socket, replace, and reinstall the lamp

assembly into place ensuring the locking tab is secure.

I n f o r ma t i o n P r o v i d e d b y :

Table of Contents