Wireless Charging Pad Operation - Jeep 2016 Cherokee Owner's Manual

Wireless Charging Pad Operation

To use the wireless charging pad, the coil in your mobile
phone needs to align with the coil in the charging pad,
which is located directly under the Qi logo. Since each
mobile phone's coil location is different, you may need a
few attempts to locate the correct spot for your mobile
phone:
1. Place your mobile phone on the wireless charging pad,
towards the Qi logo, so that the LED turns red. If the
LED does not turn red, pick up the mobile phone and
change the location.
2. Once the LED transitions from red to flashing green,
your mobile phone is correctly placed and charging.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 303
Qi Logo Phone Alignment
NOTE: The mobile phone must be aligned around the Qi
logo for the LED to transition from red to flashing green.
3. If the LED does not transition from red to flashing
green, and just turns off, pick up your mobile phone
and reposition it on the charging pad.
I n f o r ma t i o n P r o v i d e d b y :
3