Jeep 2016 Cherokee Owner's Manual page 404

402 UNDERSTANDING YOUR INSTRUMENT PANEL
• Set Time Minutes
This feature will allow you to adjust the minutes. The
"Sync time with GPS" button on the touchscreen must be
unchecked. To make your selection, press the "+" or "–"
buttons on the touchscreen to adjust the minutes up or
down.
• Time Format
This feature will allow you to select the time format
display setting. Press the "Time Format" button on the
touchscreen until a check-mark appears next to the "12
hrs" or "24 hrs" setting, showing that setting has been
selected.
• Show Time In Status Bar — If Equipped
This feature will allow you to turn on or shut off the
digital clock in the status bar. To change the Show Time
Status setting press the "Show Time in Status Bar" button
on the touchscreen until a check-mark appears next to
setting, indicating that the setting has been selected.
Safety & Driving Assistance
After pressing the "Safety & Driving Assistance" button
on the touchscreen the following settings will be avail-
able:
• Forward Collision Warning (FCW) — If Equipped
The Front Collision Warning (FCW) feature can be can be
set to Far, or set to Near. The default status of FCW is the
Far setting. This means the system will warn you of a
possible collision with the vehicle in front of you when
you are farther away. This gives you the most reaction
time. To change the setting for a more dynamic driving
experience, select the Near setting. This warns you of a
possible collision when you are much closer to the
vehicle in front of you. To change the FCW status, press
and release the "Near" or "Far" button.
I n f o r ma t i o n P r o v i d e d b y :