Parksense Sensors; Parksense Warning Display - Jeep 2016 Cherokee Owner's Manual

Hide thumbs Also See for 2016 Cherokee:
Table of Contents

Advertisement

until the vehicle speed is increased to approximately
7 mph (11 km/h) or above. When in REVERSE and above
the system's operating speed, a warning will appear in
the EVIC/DID indicating the vehicle speed is too fast.
The system will become active again if the vehicle speed
is decreased to speeds less than approximately 6 mph
(9 km/h).

ParkSense Sensors

The four ParkSense sensors, located in the rear fascia/
bumper, monitor the area behind the vehicle that is
within the sensors' field of view. The sensors can detect
obstacles from approximately 12 in (30 cm) up to 79 in
(200 cm) from the rear fascia/bumper in the horizontal
direction, depending on the location, type and orienta-
tion of the obstacle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241
NOTE: If your vehicle is equipped with the ParkSense
Active Park Assist system, six sensors will be located in
the rear fascia/bumper. Refer to the ParkSense Active
Park Assist System section for further information.
The six ParkSense sensors, located in the front fascia/
bumper, monitor the area in front of the vehicle that is
within the sensors' field of view. The sensors can detect
obstacles from approximately 12 in (30 cm) up to 47 in
(120 cm) from the front fascia/bumper in the horizontal
direction, depending on the location, type and orienta-
tion of the obstacle.

ParkSense Warning Display

The ParkSense Warning screen will only be displayed if
Sound and Display is selected from the Customer -
Programmable Features section of the Uconnect System.
Refer to Uconnect Settings" in "Understanding Your
Instrument Panel" for further information.
I n f o r ma t i o n P r o v i d e d b y :
3

Advertisement

Table of Contents
loading

Table of Contents