Fluke 114 Calibration Information Manual page 16

114, 115, 116, and 117
Calibration Information
Rotary
Switch
Position
$
N/A
DC μamps
[1] Models listed in this column also refer to the "C" version of the model. For example, model 115 steps are valid for the 115C.
[2] Do not calibrate the 117 or 117C with a line-frequency power source nearby (e.g. fluorescent light, power strip, etc.). These devices
can produce errors in the VoltAlert calibration.
[3] Wait an additional 5 seconds after calibrator has settled before pressing g.
16
Table 4. Calibration Adjustment Steps (cont)
Calibration Steps
[1]
114 115 116
C 23
N/A
Input
Terminals
[1] [1,2]
117
N/A + and COM
Calibrator
Source Value
600 μA, 0 Hz