Additional settings
Reset
72
Additional functions
It is possible to adapt individual parameters to tailor program cycles
to particular types of soiling and to optimize the cleaning result.
Select the
Additional settings
Select
Additional functions
In the following menu, you can choose between:
–
Reset
Reset of all parameters changed in Additional Functions to their
default settings
–
Increased water level
Increase in the amount of water used in all wash programs
–
Interim rinse
Introduction of an interim rinse to all programs that support this
feature (see "Program chart")
–
Dispensing system
Venting of the dispensing systems and naming of the DOS modules
–
Temperature / Time
Change in the temperature and holding time for the main wash and
final rinse stages of a wash program
Select the
Reset
button.
Reset
Yes
No
(
Select the
Yes
option and confirm your choice with the OK button.
All parameters that have been changed under "Additional
functions" will be reset to the factory default setting.
menu.
and press OK to open the relevant menu.
option and confirm your choice with the OK