Starting A Program - Miele PG 8056 Operating Instructions Manual

Operation
Program cycle
display
44
The selected program will be shown in the display, e.g.:
Normal plus
Temperature
Duration
The LED for the  button will light up and the LED for the Start/Stop
button will flash.
Delay start can be selected by pressing the OK button (see
"Additional functions").

Starting a program

Press the Start/Stop button (the LED of the Start/Stop button will

light up).
A program can no longer be changed after it has been started.
A program can either be interrupted (see "Interrupting a program")
or cancelled (see "Canceling a program").
After the start of a program, the wash phase and, for 10 seconds,
Program running are shown in the display.
During the program cycle, the arrow buttons  and  can be used to
switch between the wash phase, the required temperature, and the
actual temperature in the second line of the display.
The time remaining is shown in the third line of the display.
Normal plus
Main wash 1
Duration
55 °C
23
Min
23
Min