Installation - Miele PG 8056 Operating Instructions Manual

Building under

Installation

 In order to reduce the risk of damage from condensation, the
furniture in the area around the commercial dishwasher should be
designed for commercial use.
The dishwasher must be installed in a secure and level position. Any
unevenness in the floor level and height of the appliance must be
compensated for by adjusting the four feet.
If the dishwasher is to be installed next to other appliances or
furniture or in a niche, make sure the space provided is at least 23
5/8" (60 cm) wide and 23 5/8" (60 cm) deep.
 To ensure the stability of undercounter commercial
dishwashers, they must only be installed beneath a continuous
countertop that is bolted to the adjacent cabinetry.
When installed under a continuous counter, please ensure that the
space provided is at least 23 5/8" (60 cm) wide, 23 5/8" (60 cm) deep
and 32" 5/16" (82 cm) high.
The dishwasher feet must not be unscrewed by more than 2 3/8" (6
cm).
If the dishwasher is fitted with a lid, it can be removed as follows:
Remove both securing screws on the back of the dishwasher with a

screwdriver.
Open the door.

Unscrew the left and right fixing screws with a screwdriver.

Lift the appliance lid upwards to remove.

Installation
107