Miele PG 8056 Operating Instructions Manual page 75

DOS venting
Setting the DOS
concentration level
 To avoid damage to the dispensing system, make sure before
venting that the containers for detergent and rinse aid are
sufficiently filled and the dispensing siphons are screwed securely
to the containers.
Select DOS priming

The dishwasher will now start the automatic venting process of the
dispensing system.
Dispensing system DOS priming
As soon as the process has finished,
will appear in the display.
primed
Confirm the message with the OK button.

Please observe dispensing recommendations made by the
manufacturer of the agent.
Select Concentration

Concentration levels are given as a percentage and can be set
between 0.01 and 2.00%.
The concentration level set then applies to all programs.
Display for DOS1:
Concentration
0,30 %
(0,01 ­ 2,00 %)
If a DOS G 60 module is connected to the dishwasher, the factory
set concentration level set must be reduced by half.
Display for DOS2 rinse aid and DOS4:
Concentration
0,04 %
(0,01 ­ 2,00 %)
Use the arrow buttons  (higher)  (lower) to set the concentration

level you want and confirm your choice with the OK button.
and confirm the entry with the OK button.
will appear in the display.
Dispensing system successfully
and confirm the entry with the OK button.
Additional settings
75