Application Technology; Preparing The Load - Miele PG 8056 Operating Instructions Manual

Tips:

Preparing the load

Remove coarse food residues from the dishware.
There is no need to rinse items under running water!
 Ensure that no acid or solvent residues, especially hydrochloric
acid or chlorides, get inside the machine.
 Do not wash items soiled with ash, sand, wax, grease or paint
in the dishwasher.
These substances will damage the dishwasher.
Load the respective cookware and utensil into the appropriate

places in the baskets, but observe the following instructions:
Load the cookware so that water can access all surfaces. This

ensures that they get properly cleaned.
Load plates symmetrically in the upper and lower baskets with the

concave surface towards the center of the basket (as shown on the
following pages).
Do not place dishes or cutlery inside other pieces. They will cover

each other.
Make sure that all items are securely positioned.

Hollow items such as cups, glasses, pans, etc. must be inverted in

the basket.
Tall, narrow, hollow items should be placed in the center of the

basket if possible to ensure better water coverage.
Concave items such as mugs or bowls should be placed at an

angle so that the water can run off.
The spray arms must not be blocked by items which are too tall or

hang through the baskets. If in doubt, test for free movement by
manually rotating the spray arms.
Make sure that small items cannot fall through the holders in the

baskets. Small items, e.g. lids, should therefore be placed in the
cutlery basket.

Application technology

29