Figure 39: Aligning The At-Stackqs Card In The Slot - Allied Telesis AT-x930-28GTX Installation Manual
X930 series gigabit layer 3 ethernet switches
for vcstack
Hide thumbs
Also See for AT-x930-28GTX:
- Command reference manual (3082 pages) ,
- Installation manual (158 pages) ,
- Installation manual (214 pages)
Table of Contents
Advertisement
Chapter 5: Installing the AT-StackQS Card
Slot
100
8. Carefully align the AT-StackQS Card in the slot and slide it into the
switch. The left edge of the card fits into the slot in the bottom corner of
the switch. Refer to Figure 39.
Figure 39. Aligning the AT-StackQS Card in the Slot
9. When you feel the card make contact with the connector inside the
switch, gently press on its faceplate to seat it on the connector. Refer
to Figure 40 on page 101.
Advertisement
Table of Contents
