Download Print this page

Additional Information; Online Support; Warranty Information; Dip Switch Setting - D-Link DIS-100G-5W Quick Installation Manual

Unmanaged industrial gigabit ethernet switch dis-100g series
Hide thumbs Also See for DIS-100G-5W:

Advertisement

Alarm Relay Connecting
(for Non-PoE Models)
The alarm relay output contacts are in the middle of the DC
terminal block connector shown as the figure below.
By inserting the wires and set the DIP switch of the
respective Port Alarm to "ON", the relay output alarm will
detect any port failures, and form a short circuit.
The alarm relay out is "Normal Open".
Maximum 1A / DC 24V
Alarm
system
Extra power
system

DIP Switch Setting

DIS-100G-5S
Pin
Status
DIS-100G-5PSW
No#
DIS-100G-5SW
To enable the power
To enable Broadcast
ON
alarm.
storm rate limit.
Pin 1
To disable the power
To disable Broadcast
OFF
alarm.
storm rate limit
To enable Broadcast
ON
NOT USED
storm rate limit
Pin 2
To disable Broadcast
OFF
NOT USED
storm rate limit
ON
NOT USED
NOT USED
Pin 3-6
OFF
NOT USED
NOT USED
LED STATUS INDICATIONS
LED Name
Indicator/
Condition
color
On Green
PoE is working.
PoE
Off
PoE is not working
On Green
P1 power
P1
Off
P1 power line disconnect or
does not have supply power
On Green
P2 power line has power
P2
Off
P2 power line disconnect or
does not have supply power
On Red
Power failure alarm occurs
ALM
Off
No power failure alarm
On Green
Ethernet link up but no traffic is
detected
Copper 1 to N
Blinking
Ethernet link up and there is
port Link/Act
Green
traffic detected
Off
Ethernet link down
On Yellow
A 1000Mbps connection is
detected
Copper 1 to N
port Speed
Off
No link, a 10Mbps or 100
Mbps connection is detected
SFP 1 to N port
On Green
Ethernet link up
(N=0,1,2)
Off
Ethernet link down
Link/Act
On Yellow
SFP port speed 1000Mbps
connection is detected.
SFP 1 to N port
Off
No link or a SFP port speed
(N=0,1,2) Speed
100Mbps connection is
detected

Additional Information

You can refer to the user manual or visit
http://support.dlink.com/

Online Support

If there are any issues that are not in the user manual,
please visit
line
has power
your appropriate local D-Link support website.

Warranty Information

Visit
http://warranty.dlink.com/
information.
for more support.
http://support.dlink.com/
which will direct you to
to view the D-Link Warranty
3

Advertisement

loading

This manual is also suitable for:

Dis-100g-5swDis-100g-5pswDis-100g series