Figure 23. Static Route Configuration Menu - D-Link 502G - DSL Router - EN User Manual

Static Route Configuration – Modify/Add
To add or modify a static route, define the following parameters:
Name
IP Address
Subnet Mask
Gateway
Metric
State
Click on OK to put the static route into the table. It will appear in the Static Route Table shown previously.
To clear the settings for this configuration, click the Clear button.
To return to the Static Route Table, click the Exit icon.
DSL-502G ADSL Router User's Guide

Figure 23. Static Route Configuration Menu

Provide a name for the static route or subnet (optional).
Type in the IP address of the subnet or device where packets are routed.
Type in an appropriate subnet mask that allows the static route to function.
Type in the IP address of the gateway used for traffic destined for the specified
subnet or device.
Type in the maximum number of hops allowed for the static route.
Enable of disable the route using the drop-down menu.
42