Selecting Points By User Address - Honeywell XI581AH User Manual

XI581/2 BUSWIDE OPERATOR INTERFACE
Access Level
Select Point from Main Menu
Modify Point Description
zero. The mapped NV of a data point can be displayed as one of the data point
description screens. An example is shown below.
NV Mapping
User Address Htg_zone_pump_1
Out: 4095 nvoHeatPump
In:
The NV index is shown (0 to 4095) along with the NV name.
Purpose To find and display specific user addresses and modify their attributes.
All users can display point information. You must have access level 3 to modify
point attributes.
1. At the Main Menu, use the arrow keys to move to and highlight Data Points.
Press Enter (↵) to complete the selection.
RESULT: The 'Data Points' screen appears. User Address is highlighted by
Data Points
User Address
Manual Operation
Accumul. Runtime
Type Selection
Points in Trend
2. Press Enter (↵) to select User Address.
User Address
Exhaust_fan
Hall_main_lights
Main_water_meter
Conf_room_temp
NOTE:
3. Use the arrow keys to move to and highlight the desired point. Press Enter (↵) to
complete the selection.
RESULT: The display window shows the description of the point you selected.
4. Use the following steps to modify an attribute for the selected point:
a. Use the arrow keys to move to and highlight the field.
b. Press Enter (↵) to select the field.
The field begins blinking and is no longer highlighted.
c. Press the plus or minus keys to toggle or increment/decrement attribute.
d. Press Enter (↵) to complete the entry.
default.
Suppress Alarm
Add Template
Delete Template
Modify Template
Template Search
1
On
000
23
All user addresses for points may not be able to appear in the display
window at the same time.
The information that appears in a point description varies depending
on the type of point you selected (digital, analog, or totalizer). The
table in the beginning of this "Data Point Description" section
describes the various attributes.
53
ALPHABETIC REFERENCE
Back

Selecting Points by User Address

L L L L
I
m3 1
I
°C
M
EN2B-0126 (74-3554-8)