Table of Contents
Advertisement
FUNCTION
CODE
OUTLINE
NOTE
FUNCTION
CODE
OUTLINE
NOTE
FUNCTION
CODE
OUTLINE
NOTE
Controls peripheral device #1 immediately
<FS>
(1C)H
Executes drive pulse for peripheral unit 1 (immediate).
This code differs from the <BEL> code as follows:
When the printer receives an <FS> code, the command is
executed immediately. The <BEL> code is stored in the data
buffer in the same manner as other codes, and executed in the
order in which they are received.
Immediate drive command for peripheral unit 2
Peripheral Units 1 and 2 cannot be driven simultaneously.
Controls peripheral device #2 immediately
<EM>
(19)H
Drives peripheral unit 2. Pulse width is fixed at 200 ms with a
fixed delay time of 200 ms.
When the printer receives a <EM> code, the command is
executed immediately. Same as <SUB>.
Peripheral Units 1 and 2 cannot be driven simultaneously.
Controls peripheral device #2 immediately
<SUB>
(1A)H
Drives peripheral unit 2. Pulse width is fixed at 200ms with a fixed
delay time of 200 ms.
When the printer receives a <SUB> code, the command is
executed immediately. Same as <EM>
Peripheral Units 1 and 2 cannot be driven simultaneously.
32
Advertisement
Table of Contents
