Table of Contents
Advertisement
FUNCTION
CODE
OUTLINE
Transmits EOT status
<EOT>
(04)H
Transmits the EOT status of the printer to the host in real-time.
(Does not execute after taking fro reception buffer, but immedi-
ately upon receiving from the host.) It is in a "Data ready" state
when using a bi-directional parallel interface.
• When one <EOT> command is sent to the printer, it will not
send the next <EOT> command until the EOT status is
received.
• When using the <EOT> command, always set the automatic
status function to invalid.
EOT Status
b7
b6
b5
b4
(Always 1)
b3
b2
b1
b0
44
Bit 2:
Paper Near End
1: Near End
Bit 3:
No Paper Error (Same as ENQ Bit 3)
1: Error
Bit1, Bit 5 to Bit 7 statsu unknown
Advertisement
Table of Contents
