Table of Contents
Advertisement
FUNCTION
CODE
OUTLINE
FUNCTION
CODE
OUTLINE
Enables/disables automatic status
<ESC> <RS> "a" n
(1B)H (1E)H (61)H n
This command sets the transmission conditions of the automatic
status. Initial values are according to DIP switch 1-6. See
Chapter 2 Automatic Status Specifications for details on the
contents of the automatic status.
Value of n Hex
0 or "0"
(00H) or (30H)
1 or "1"
(01H) or (31H)
Resets printer hardware and produces a test print
<ESC> "?" <LF> <NUL>
(1B)H (3F)H (0A)H (00)H
Resets the printers hardware and executes one self-test print.
After this command is sent, the next data is not sent until the
printer is confirmed to be back online.
47
Automatic Status Valid/Invalid
Invalid
Valid
Advertisement
Table of Contents
