Table of Contents
Advertisement
FUNCTION
CODE
DEFINITION RANGE
OUTLINE
NOTE
Sets vertical tab stops
<ESC> "B" n1 n2 ...nk <0>
(1B)H (42)H n1 n2 ...nk (00)H
< =
< =
< =
n1
n2
n3 ... < nk
1
Cancels all current vertical tab stops and sets new vertical tab
stops at lines n1 , n2 , etc. where n1 , n2 , etc. are numbers
between 1 and 255. A maximum number of 16 vertical tab
positions can be set. Tab positions must be specified in
ascending order; any violation of ascending order terminates the
tab position list. Standard termination is by the <0> control code.
Vertical tab positions are set in terms of the current line spacing
and do not move if the line spacing is changed later.
If a tab set position <nk> is equivalent or smaller than <nk -1> just
preceding the tab set position, setting of vertical tab is assumed
as complete.
24
< =
< =
< =
< =
255
1
k
16
Advertisement
Table of Contents
