Table of Contents
Advertisement
Printer Status
Printer Status is the overall status transmitted in the third byte of the auto-
matic status. Printer status is returned as transmission byte count -2 added
by the Header 1. It always updates with new information. (There is no
historical record existing.) Tables 3-5 to 3-9 show the composition of the
overall status. The status of bits described as "Invalid" in the tables are
always "unknown."
Table 3-5 Printer Status 1 <Printer Status> (Third Byte)
Bit
Content
0
Always 0
1
<ETB> Command
2
Compulsion SW Status
3
Online/Offline Status
4
Always 0
5
Invalid
6
Offline using the Online SW
7
Not Used (Fixed at 0)
* Bit 1 is cleared to 0 when returned to the host. (Clearing bit 1 to 0 is not a
target for the automatic status.)
Table 3-6 Printer Status 2 (Error Information) (Fourth Byte)
Bit
Content
0
Always 0
1
Invalid
2
Mechanical Error
3
Auto Cutter Error
4
Always 0
5
Reset Not Possible Error
6
Stopped Because of
Hot Print Head
7
Not Used (Fixed at 0)
Status 0
Not Executed
Open
Online
Does not occur
Status 0
No Error
No Error
No Error
Not Stopped
54
Status 1
Executed
Closed
Offline
Occurs
Status 1
Error Occurred
Error Occurred
Error Occurred
Stopped
Advertisement
Table of Contents
