Table of Contents
Advertisement
1-2-2. Ptint Position Control
FUNCTION
CODE
OUTLINE
FUNCTION
CODE
OUTLINE
FUNCTION
CODE
OUTLINE
Line feed
<LF>
(0A)H
Data in the line buffer is printed out and one line is fed. If data
does not exist before this code is received, the printer only feeds
one line.
Vertical tab
<VT>
(0B)H
Feeds the paper to the next vertical tab set position.
When a vertical tab is not set, line feed is not performed. If the
current line is at or below the last vertical tab set position, the
paper feeds to the top of the next page.
Form feed
<FF>
(0C)H
Inputting this code executes a page feed, on SP2320/2360 series
printers, after printing the data in the line buffer. On SP2520/
2560 series printers this code performs the following according to
the settings of the memory switches 0-2 and 0-3.
MSW 0-3
MSW 0-2
0
0
0
1
1
0
1
1
*1: Paper feed to the cutting position is executed in inches.
17
<FF> Command Function
SP2520/2560
Executes page feed
Executes full cut (*1) after feeding
paper to the cutting position.
Executes page feed
Executes partial cut (*1) after feeding
paper to the cutting position.
Advertisement
Table of Contents
