6
■ Optional HM-168 description
Alligator type clip
To attach the speaker-mic.
to your shirt or collar, etc.
PTT switch
Transmits while pushed
Receives while released
Microphone
Speaker
Turn the transceiver power OFF
when connecting the HM-168.
NEVER immerse the connector in water. If the connector becomes
wet, be sure to dry it BEFORE attaching it to the transceiver.
NOTE: The microphone is located as shown in the diagram
above. To maximize the readability of your transmitted signal
(voice), hold the microphone approx. 5 to 10 cm from your
mouth, and speak in a normal voice level.
35
SPEAKER-MICROPHONE
Need help?
Do you have a question about the IC-F61M and is the answer not in the manual?
Questions and answers