User Set Mode - Icom IC-F61M Instruction Manual

3
BASIC OPERATION

■ User set mode

The User Set mode allows you to set seldom-changed settings. If
the transceiver has [User Set Mode] assigned to it, you can "cus-
tomize" the transceiver operation to suit your preferences and op-
erating style.
Entering the user set mode:
q Push and hold [User Set Mode] for 1 sec. to enter the User Set
mode.
w Push [User Set Mode] several times to select the appropriate
item. Then push [CH Up] or [CH Down] to set the desired level/
condition.
• In the User Set mode, the selectable items are preset by your
dealer. The presetable items are Backlight, Beep, SQL Level,
Ringer Level, AF Min level, Mic Gain, VOX Gain*, VOX Delay*,
Battery Voltage, Signal Moni, Vibration and Lone Worker.
*Appears when the optional headset is connected.
r Push and hold [User Set Mode] again to exit User Set mode.
19