Applying Stamps To A Fax - Muratec MFX-C2280 Feature Overview Manual

Applying Stamps to a Fax

PRE-REqUISITES
•
APPLICATION
Customer wants to draw attention to the fax transmission .
In this case, it's an URGENT message and the sender
wants to make sure that the recipient recognizes the importance of the incoming fax .
1 . Touch Scan/Fax .
2 . Touch Application .
3 . Enter D to access Stamp/Composition
or scroll to Stamp/Composition .
4 . Touch Stamp .
5 . To specify a stamp,
touch ON .
6 . Touch Urgent .
7 . The default should
be All Pages; if not,
touch All Pages .
8 . Touching Text Details
displays a screen for
specifying the color (please note that you cannot fax over a telephone line
in color, this is for your reference only) and text size (Minimal or Standard
– the default is standard) .
when scanning and it allows you to denote the size of the text.
9 . Touch OK .
10 . Touching Print Position displays a screen for specify the print position
of the Stamp .
11 . Touch Center .
12 . Touch Adjust Position .
.
If not on the home screen,
touch the Menu key on
the Control Panel
This function can be used to apply a colored stamp
You can make fine adjustments
by touching Adjust Position.
Muratec MFX-C3680 Series
.
29
Fax Features