Muratec MFX-C2280 Feature Overview Manual page 72

PRE-REqUISITES/SYSTEM REqUIREMENTS
• A fax kit must be installed on the MFP . Please note that extension lines cannot be
used with this function .
• Can only be used within an Intranet .
• IP Address Fax function must be activated via Service Mode by an authorized
Konica Minolta service technician .
• Please check with your Network Administrator to ensure that all the network
settings have been made . For assistance, please contact your local authorized
Network Settings
Network Fax Settings
Fax Settings
70
SMTP
Intranet
TCP/IP Settings
IP Address Fax is set to ON
SMTP TX Settings (Port No., Connection Timeout)
SMPT Settings (SMTP RX ON/OFF, Port No. Connection Timeout)
Header Information
Report Settings