Muratec MFX-C2280 Feature Overview Manual page 26

26 . Select line settings for Line 2 .
27 . Touch Select Line .
28 . Touch TX & RX to enable sending and receiving to this line .
29 . Touch OK .
30 . Touch Close 4x to return to the Main Menu .
These settings will forward all incoming faxes received on Line 1 to an FTP
Address and only print the transmission if the forwarding fails and all incoming
faxes received on Line 2 will be printed . In this configuration, users will be able
to transmit faxes using Line or Line 2 .
You can reverse the settings and instruct the MFP to print incoming faxes
received on Line 1 and forward incoming faxes to the selected destination
on Line 2.
24