System Hardware Menu; Thermal Sensor Submenu; Wake On Events Submenu - NEC EXPRESS5800/120Ed User Manual

System Hardware Menu

Feature
Thermal Sensor
Wake On Events
AC Link
ESM IRQ
Error Log
Initialization
Console
Redirection

Thermal Sensor Submenu

Feature
Thermal Sensor
Upper Limit
Lower Limit

Wake On Events Submenu

Feature
Wake On LAN
Wake On Ring
3-12 Configuring Your System
Choices or
Display Only Description
Refer to Thermal Sensor
Submenu.
Refer to Wake On Events
Submenu.
Power On Determines the mode of AC
Last State
Link.
Stay Off
Disabled Determines routing of the ESM
IRQ5 interrupt.
IRQ10
IRQ11
Press Enter
Request to initialize the Error
Log now.
If Clear OK, then display
"System Event Log Cleared!"
If Clear NG, then display
"System Event Log Not
Cleared!"
Additional setup menu to
configure console.
The Boot-Time diagnostic
screen is enabled if redirection
is enabled.
Choices or
Display Only Description
Enabled
When enabled determines if
Disabled the BIOS will disable boot (if
temperature is not within a
safe range).
50 Sets the upper temperature
limit in centigrade.
5 Sets the lower temperature
limit in centigrade.
Choices or
Display Only Description
Enabled
Enables Wake ON LAN
Disabled support.
Enabled
Enables Wake ON Ring
Disabled support.
Your Setting
Your Setting
Your Setting