Table of Contents
Advertisement
Type the ROM image file name in this format:
d:\path\filename
where
d: = the disk drive the file is on
\path = the directory the file is in, if it is not
in the disk drive's current directory
\filename = the eight- (or fewer) character
name of the file plus the file extension (the
period and three characters after it)
Press ENTER after you fill in the ARC image
file name or press ENTER by itself if you are
not entering an ARC image file name. Press
ENTER again to skip filling in the RF image
file name. The RF image file does not apply
to the PTC-960X.
6. The Main Menu displays on your PC's
monitor screen:
0. Quit
1. Send the image(s) to PTC
2. Select baud rate
3. Select comm port n
4. Reselect an ARC file
5. Reselect an RF file
Current file selection(s):
ARC =
RF
=
Enter [0 - 5]:
7. Change the baud rate, if necessary.
The default baud rate is "autobaud," which
means the PC starts communicating at
38,400 baud and slows down, if necessary,
until it connects with the PTC. This is the
default setting and should be used if possible.
44
Advertisement
Table of Contents
