Table of Contents
Advertisement
1: User ctrl
2: Exit
Type 0 to put the FLASH.EXE program in
system control mode. System control mode
returns control of the flash EPROM program-
ming to your PC.
The following prompt displays on your PTC
screen:
Do you wish to
program the
flash ROM now?
(Y/N):
Type Y and press ENTER.
Note: The FLASHPC.EXE program runs
on your personal computer, and the
FLASH.EXE program runs on your PTC
during this process.
12. Press any key on the PC's keyboard to begin
downloading and reprogramming.
If you wish to abort the process, press the
ESC key on the PC. The FLASHPC.EXE
program returns to the Main Menu.
Before downloading begins, the PC displays
the following message:
Establishing a connection...
The PC then displays status windows that
describe the current stage of downloading
("Erasing flash ROM," "Programming," and
so on).
FLASHPC.EXE then erases and reprograms
the flash EPROM. When the process is com-
plete, the PTC sounds one long beep and then
47
Advertisement
Table of Contents
